Tapping Attachments

Product Details:

Specifications:

• Size: M3 to M12 , M8 to M20, M14 to M36, M22-M48
• Material: Steel/SS/CI Non ferrous
• This tapping attachment is mainly used on mechanically and numerically controlled machines
• WFLK/MT attachments used on radial/pillar drills
• WFLK/ST attachments used on CNC turning machines
• WFLK/BT/CT/TC/ISO/HSK attachments are used on machining centers and milling machines
• Attachments are used with WE (Without Clutch) and WES (With clutch) adopters
• WFLK attachments are provoded with axial length compensation both compression & expansion

Additional Information:

• Item Code: WFLK
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Pune
• Delivery Time: 2 days
• Packaging Details: Plastic box

Specifications:

• Tapping Capacity from M1.4 to M30 (as per attachment).
• HRF1/MT1 or 2 M1.4-M7, HRF2/MT2 or MT3 M3-M10
• HRF3/MT3 or 4 M 6-M18, HRF 4/MT4 or 5 M14-M30
• To be used with suitable WE tap adopters
• Usable on every vertical drilling machine or machines with rotating non-reversible spindles.
• Right or Left Hand Tapping Without Modification.
• Accurate Neutral Mechanism.

Additional Information:

• Minimum Order Quantity: 1 Unit

Features:

• Only Suitable for Pillar type Driling Machines.
• Versatile Application.
• Right/Left Hand Tapping without Modification.
• Auto Reverse Mechanism. Rapid Backout.
• Self Centering Chuck
• Not Suitable for Radial Drilling Machine.
• Supplied with rubber collets. No need of separate collets

 

Specifications:

• Typing Capacity (mm): Shank (Male)
• M3-M10: MT-1 or MT2
• M6-M16: MT-2 or MT3
• M8-M18: MT-3
• M10-M24 MT-3 or MT4
• M14-M30 MT-4

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Minimum Order Quantity: 1 Unit
• Port of Dispatch: Pune
• Delivery Time: 3-4 days

Product Details:

Specifications:

• Quick Change: A Quick change tap adopter for your taps allows you to change taps on the fly.
• Safety Clutch: The built in safety mechanism, operates as soon as the set torque limit is crossed & save the tap from breakage.
• Float Radial Parallel: Small misalignments are taken care of by this float.
• Length Compensation: Built in Length compensation takes care of small push or pull to the spindle or feed difference.
• Tapping operations especially on machines have traditionally been very tricky to execute due to frequent tap breakage.
• Available in following ranges: M3-M12 MT2,M8-M20 MT3
• Separated tap adopters WE1 for 3-12 attachment WE2 for 8-20 attachment

Tap Related Problems:

• Wearing of Tap cannot be easily quantified ( Use of Worn out taps)
• Use of tap with improper tap geometry for a particular application.
• Use of non standard/inferior quality Taps.
• Chip Clogging
• Tapping dies not follow the pre tap hole ( misalignment )
• Mismatch of machine feed & tap feed may cause the tap to break in tension/compression.
• Use of improper cutting fluid.
• No safety mechanism to limit torque below torque breakage value of tap.

Additional Information:

• Item Code: QSFL
• Port of Dispatch: Pune
• Delivery Time: 3-4 days
• Packaging Details: Plastic box

MLC(Minimum length compensation chucks) are designed to do the tapping on the machines having rigid tapping facility. For synchronised tapping these chucks are provided with compression expansion of 0.5MM
MLC chucks are available in following shanks
BT40,BT50 SK40,SK 50 HSKA63,HSKA100
ST Shank 20,25 32 dia
These chucks are available in following ER collet versions
ER16,ER20,ER32,ER40

MLCs to be used with ERG tap collets

It covers the tapping range M3 to M33

Additional Information:

• Minimum Order Quantity: 1 Piece

The quick change chuck QCDTC can be used on drilling machines and also on the toolroom milling machines.
It can be used both vertically horizontally
It can be used with or without jig bushes
The runout of the drill is very less as compared to conventional straight type quick change chucks
It can be used for Drilling, Chamfering, Counterboring Reaming and Tapping
Can be used for both straight shank taper shank drills
QCDTC Available in three different sizes:
1. Size 2 QCDTC2 for drilling up to MT2 (up to 23 mm dia)
2. Size 3 QCDTC3 for drilling up to MT3 (up to 32.mm dia)
2. Size 4 QCDTC4 for drilling up to MT4 (up to 50 mm dia)

Additional Information:

• Minimum Order Quantity: 1 Set